Brodit ProClip 213483 Passive holder Mobile phone/Smartphone, Handheld mobile computer, Portable printer Black

Mounting bracket Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included. INSTALLATION INSTRUCTIONS: Please read the instructions and look at the pictures carefully before installing the bracket. This mounting bracket consists of 4 parts: Part 1 - top plate. part 2 and 3 - vertical support plates. Part 4 - mounting plate. 1. Use the enclosed alcohol pad to clean the area where the bracket is to be installed. Remove the adhesive tape covers on the bracket. Press downward on the panel by the information window so it flexes slightly and you can see where the angled part of the top plate will fit. Maintain preassure and hook the angled edge of the top plate into the gap under the panel. Press the top plate downward so the tape attaches. Press the enclosed gap opener into the seam between the frame surrounding the air vents and the center console, to viden the gap. 2. Hook the angled edges of the two vertical support plates into the gap on each side of the gap opener. Make sure the holes align properly to the top plate before fixating the tape. Screw the support plates into place with the enclosed screws. Remove the gap opener. 3. Screw the mounting plate into place with the enclosed screws. 4. The mounting bracket is in place.